User Tools

Site Tools


wiki:adding_a_key_saab_9-3_2003

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

wiki:adding_a_key_saab_9-3_2003 [2017/01/23 19:40] (current)
wejde created
Line 1: Line 1:
 +If you have a Saab 9-3 with model year 2003- or newer and only have one key fob it's a really good idea to invest in an extra one as soon as possible. Because if you loose both of your keys you will have to replace the CIM and the locking cylinders. If you buy a key fob that is programmed to another car you will not be able to program it.
 +
 +====== Requirements ======
 +
 +  * SAAB 9-3 MY03- or newer
 +  * At least one working key fob
 +  * A new/cleared key fob
 +  * Tech2
 +  * SAAB 1XX.000 PCMCIA card
 +
 +====== Preparations ======
 +
 +You will need to have all the keys that you want to function with your car present when you add a new key fob.
 +
 +To activate this function you will need security access which can be downloaded from TIS (TIS2000 or GlobalTIS).
 +
 +====== Procedure ======
 +
 +  * Select ''​F0:​ Diagnostics''​
 +  * Select ''​Model year''​
 +  * Select ''​Saab 9-3 Sport (9440)''​
 +  * Select ''​F4:​ All''​
 +  * Select ''​F7:​ Add/Remove ''​
 +  * Select ''​F2:​ Add Keys''​
 +  * Press ''​Enter''​ when the info about security access and that you'll need all keys present accurs. (If you haven'​t downloaded security access from TIS yet, the Tech2 will prompt you to do)
 +  * Turn the ignition key to LOCK position when the Tech 2 prompts you to.
 +  * Remove the ignition key when the Tech 2 prompts you to.
 +  * The Tech 2 will now prompt you to insert a valid key to the ignition, this will be your original key.
 +  * Press ''​OK''​ when you have inserted a valid key.
 +  * Press ''​Yes''​ when the Tech 2 asks if you want to program another key.
 +  * Remove the ignition key when the Tech 2 prompts you to.
 +  * Insert the key that you wish to program.
 +  * Press ''​OK''​
 +  * Press ''​No''​ when the Tech 2 asks you if you want to add another key when you have programmed all the keys you want functioning with your car. If you wish to add more keys you press ''​Yes''​
 +  * Remove the ignition key when the Tech 2 prompts you to.
 +  * Insert the key again when the Tech 2 prompts you to.
 +  * Turn the ignition key to ON position when the Tech 2 prompts you to.
 +  * The Tech 2 will now clear all DTC:s.
 +  * Turn the ignition key to LOCK position when the Tech 2 prompts you to.
 +  * And you're done!
  
wiki/adding_a_key_saab_9-3_2003.txt ยท Last modified: 2017/01/23 19:40 by wejde