User Tools

Site Tools


wiki:enabling_and_disabling_drl_daytime_running_lights_on_ng9-3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

wiki:enabling_and_disabling_drl_daytime_running_lights_on_ng9-3 [2016/11/12 19:16]
berry created
wiki:enabling_and_disabling_drl_daytime_running_lights_on_ng9-3 [2017/02/19 19:18] (current)
wejde
Line 1: Line 1:
-You may find the fact that from the factory, most of our cars come with the lights defaulted to ON in all positions of the dash exterior lighting switch. This adjustment cannot be found in the common adjustments,​ like some models can be. +You may find the fact that from the factory, most of our cars come with the lights defaulted to ON in all positions of the dash exterior lighting switch. This adjustment cannot be found in the common adjustments,​ like some models can be. In order to change the values, we need to re-add the following 2 modules to the car: UEC (Under-Hood Electrical Center) and REC (Rear Electrical Center).
  
 In order to modify the configuration of your DRL's, follow this detailed procedure. In order to modify the configuration of your DRL's, follow this detailed procedure.
  
-====== ​Minimum requirements ​====== +====== ​Requirements ​====== 
- +  
-  - Tech2 w/ CANdi Module + * SAAB 9-3 MY03- or newer 
-  ​- ​Security Access ​with the Tech2+ ​* ​Tech2 with CANdi Module 
 + Security Access 
 + * SAAB 1XX.000 PCMCIA card
  
 ====== Procedure ====== ====== Procedure ======
  
-  ​- Begin by firing up your Tech2 and hooking it up to your diagnostic port on your NG9-3. +  ​* Select ''​F0:​ Diagnostics''​ 
-  ​Select ​the Diagnostic Tool, and input the pertinent vehicle information as you normally would. +  * Select ''​Model year''​ 
-  ​- In order to change the values, we need to re-add the following 2 modules to the car; The UEC (Under-Hood Electrical Center, and the Rear Electrical Center). +  * Select ''​Saab 9-3 Sport (9440)''​ 
-  ​- Begin with the UEC. You do not need to remove the UEC to simply reprogram it, just select "​ADD"​. +  ​Select ​''​F4:​ All''​ 
-  ​- You will begin telling the Tech2 the configuration of your vehicle. Once we get to the headlights portion, ​there will be several options. ​If you would like your DRL's disabled, ​you want to tell the Tech2 you only want your headlights on while your selector is in ROW POS 2. If you select ROW POS 0, that will tell the vehicle to enable ​the headlights at all times.  +  ​* Select ''​F7:​ Add/Remove ''​ 
-  ​The next step of enabling/ disabling the DRL'​s ​is to make the tail lights match the headlights. +  * Select ''​F1:​ Control Modules''​ 
-  ​- Repeat the above procedure, but for the Rear Electrical Center +  * Select ''​UEC'' ​(Underhood ​Electrical Center) 
- +  ​* Select ''​Add''​ 
-Once these procedures are done, you should go into the **BODY** diagnostics page to adjust your fog lights. There are 3 setups for the Fog lights, and you will need to select ​ROW POS 1 & 2 for the fog lights ​to have the ability to turn on while your headlights are on. This will also allow the fog lights to remain on while the high beams are being used.  +  ​* Follow ​the on-screen instructions,​ when you get to the headlight part of the guide there will be several options. ​ 
- +    * To have the DRL's disabled ​among headlightschoose ​the option that headlights ​should be on when the light selector is in ROW POS 2. 
-This concludes ​the procedure ​to enable or disable your Daytime Running ​Lights. +    * To have the headlights ​ON at all times choose ROW POS 0
 +  ​The next step is to make the rear lights match the headlights. 
 +  ​* Go back to the menu where you selected ''​UEC''​ 
 +  * Select ''​REC''​ (Rear Electrical Center) 
 +  * Follow the on-screen instructions as you did for the UEC. 
 +  ​Go back to the ''​Diagnostics''​ menu. 
 +  ​Select ''​F3:​ Body''​ 
 +  ​Select ''​Exterior Lightning and Horn''​ 
 +  ​Select ''​Fog Lights Front''​ 
 +    * There will be three different setups ​to choose between. 
 +  * Select ''​ROW POS 1 & 2'' ​for the ability ​to have the fog lights ON when your headlights are on.  
 +    * This will also allow the fog lights to remain on while the high beams are being used. 
 +  * Repeat ​the same procedure ​for ''​Fog ​Lights ​Rear''​ 
 +  
wiki/enabling_and_disabling_drl_daytime_running_lights_on_ng9-3.txt · Last modified: 2017/02/19 19:18 by wejde