User Tools

Site Tools


wiki:enabling_aux_saab_9-3_2003-2006

Table of Contents

If you have a Saab 9-3 with model year 2003-2006 and don't have an AUX input it can be retrofitted. This can be done at ICM1, ICM2 and ICM3 and the function must be activated with Tech2 after the adapter kit is installed.

Requirements

  • SAAB 9-3 MY03-06
  • SAAB AUX Adapter Kit (OEM 32000102)
  • Tech2
  • SAAB 1XX.000 PCMCIA card

Preparations

It's not necessary, but a good idea is to first install the AUX Adapter Kit (Installation instructions)in the car so you can test it right after the function is activated. The adapter kit can also be installed after the function is activated.

To activate this function you will need security access which can be downloaded from TIS (TIS2000 or GlobalTIS).

Procedure

  • Select F0: Diagnostics
  • Select Model year
  • Select Saab 9-3 Sport (9440)
  • Select F4: All
  • Select F7: Add/Remove
  • Select F3: Accessories
  • Select AUX-Input
  • Select Add (If you haven't downloaded security access from TIS yet, the Tech2 will prompt you to do)
  • Exit out of the Tech2, cycle the key off and back on and the function should now be enabled. To enter AUX, use the SRC-button (Source) on the steering wheel or press the CD/Disc-button on the stereo unit twice.
wiki/enabling_aux_saab_9-3_2003-2006.txt · Last modified: 2017/01/22 20:47 by wejde