User Tools

Site Tools


wiki:fob_remote_programming

FOB & Remote Programming

  • Open the driver’s door.
  • Insert key into ignition.
  • Turn the ignition switch from the Accessories position to the LOCK position three times within 3 seconds.
  • Within 10 seconds, close and open the door two times.
  • Turn the ignition switch to the Accessories position and then to the LOCK position three times again within 3 seconds.
  • Within 10 seconds, close and open the door. Verify that the power door locks cycle once to confirm that the system is in programming mode.
  • Within 20 seconds, press the LOCK button on the transmitter you are programming. Verify that the door locks cycle once.
  • Within 20 seconds, press the UNLOCK button on the remote. Verify that the door locks cycle once to confirm that the system has accepted the remote’s code.
  • Repeat steps 7 and 8 for each remote to be added.
  • Remove key from ignition.
wiki/fob_remote_programming.txt · Last modified: 2020/08/18 16:36 by modz2014