User Tools

Site Tools


wiki:key_programming

Holden VR/VS/VT Commodore Key Programming

  • Connect Scantool and go to BCM
  • Read and erase all stored DTC's
  • Select security and select program additional keys
  • Insert key in the ignition and turn the ignition to ON position
  • Select program additional key from the menu
  • Remove key from ignition and turn ignition on with the new remote key when prompted by the scantool
  • When key is programmed remove from ignition and test cycle the locks

Note: VR/VS/VT model Commodores can only have a maximum of 6 keys coded to the vehicle. Keys cannot be erased from the system once they have been programmed.

  IMPORTANT: Dash security LED must be OFF for this procedure to work
wiki/key_programming.txt · Last modified: 2020/08/18 16:35 by modz2014