Relative Content

Blog Archives

Writing PCMCIA cards using GlobalTIS

GlobalTIS is a computer-based system used for reprogramming software as well as troubleshouting and diagnostics on vehicle control units. GlobalTIS is used through your web browser and requires a compatible version of Java to be able to work correctly. The system requires a hand-held, programmable diagnostic tool, TECH2, in order to communicate with the vehicle. […]

Writing PCMCIA cards using TIS2000

Introduction TIS2000 is a computer-based system used for reprogramming software as well as troubleshouting and diagnostics on vehicle control units. The system requires a hand-held, programmable diagnostic tool, TECH2, in order to communicate with the vehicle. Source: SAAB WIS Online TIS2000 can be used to download new software to your PCMCIA card used in the […]

Opel

How to the check the odo-meter on an Opel

Opel

Technical Procedures – Opel These technical procedures will guide you through the steps to undertake for accomplishing a certain functional goal. How to the check the odo-meter on an Opel/ How to activate daylights on an Opel

Writing PCMCIA cards using Tech2 Card Writer

Introduction The Tech2 Card Writer is an easy to use, yet relatively slow processing, application which allows to write linear flash PCMCIA cards using the RS-232 connection on the Tech2 device. This application is written by AlexRE from AlexRE.RU in 2011. Requirements Tech2 12V DC adapter as power source for the Tech2 PCMCIA card inserted […]

Writing PCMCIA cards using Memory Card Explorer

Introduction The Memory Card Explorer, in short MCE, is a versatile application which allows to read and write linear flash PCMCIA cards. Reading and writing cards using the internal PCMCIA slot is relatively fast as writing, including verify, a 32MB card takes around 5 minutes. This article covers version 3.16, designed for Microsoft’s Windows NT4.0/2000/XP […]

Enabling Doors & Trunk Lock at Drive off (Saab 9-3 2003-)

If you want your car to automatically lock the doors and the trunk when you drive off, this function can be enabled with Tech2. Requirements SAAB 9-3 MY03 or newer Tech2 with CANDi module Security Access SAAB 1XX.000 PCMCIA card Preparations To activate this function you will need security access which can be downloaded from […]

Enabling Doors & Trunk Unlock at Key out (Saab 9-3 2003-)

If you want your car to automatically unlock the doors and the trunk when you take out the key from the ignition lock, this function can be enabled with Tech2. Requirements SAAB 9-3 MY03 or newer Tech2 with CANDi module Security Access SAAB 1XX.000 PCMCIA card Preparations To activate this function you will need security […]

Change Unlock Logic (Saab 9-3 2003-)

With the Tech2 it’s possible to change the unlock logic fot your car (what happens when you press the Unlock button on your key once) Requirements SAAB 9-3 MY03 or newer Tech2 with CANDi module Security Access SAAB 1XX.000 PCMCIA card Preparations To activate this function you will need security access which can be downloaded […]

Calibrate AHL (Xenon) (Saab 9-5)

This procedure will describe how to calibrate the AHL (Automatic Headlamp Leveling) for the Xenon headlights. After changing the front and/or rear load angle sensor a calibration of AHL needs to be performed. The calibration procedure is done separately for the left and right AHL control module. Requirements SAAB 9-5 with Xenon headlights Tech2 (CANDi […]