Key Programming

Holden VR/VS/VT Commodore Key Programming


  • Dash security LED must be OFF for this procedure to work


  • Connect Scantool and go to BCM
  • Read and erase all stored DTC's
  • Select security and select program additional keys
  • Insert key in the ignition and turn the ignition to ON position
  • Select program additional key from the menu
  • Remove key from ignition and turn ignition on with the new remote key when prompted by the Tech2
  • When key is programmed remove from ignition and test cycle the locks

Note: VR/VS/VT model Commodores can only have a maximum of six keys coded to the vehicle. Keys cannot be erased from the system once they have been programmed.